PLC CONTROLS

SIEMENS 195-0011 Controller,Receiver SIEMENS Item Specifics Item: Pneumatic Receiver Controller Type: Dual Input Air Consumption (SCFM): – Application: Used to Control Temperature, Humidity and Pressure of Mechanical Equipment in Commercial Buildings such as Offices, Hospitals, Universities and Schools Authority: – Compensation Start Point: – Depth (In.): 3-1/2 Gauge: No Height (In.): 5-11/16 Includes: Plug-in Air Connectors and Internal Restrictors for Transmitter Inputs Item: Pneumatic Receiver Controller Operating Temp. Range (F): 40 to 120 Pressure (PSI): 22 Op; 30 max. Reset Capability: No Type: Dual Input Width (In.): 6-3/4 Control Type: Input #1 DA, Input #2 RA Output: 0 to 22 Product Description: – Characteristics: – Air Consumption: 60 SCIM Air Input Range (PSI): 3 to 15

 

** OPEN ITEM. PHOTO IS STOCK PHOTO **

Valve Type

B209
Valve Size0.5″ [15]
Cv Rating0.8 Cv
Flow Rating
Flow Pattern2 Way
Flow CharacteristicA-port equal percentage
Servicechilled or hot water, 60% glycol
Action75°
End FittingNPT female ends
Material (body)forged brass, nickel plated
Material (ball)stainless steel
Material (plug)
Material (disc)
Material (stem)stainless steel
Material (seat)PTFE
Material (seat O-rings)
Material (characterizing disc)TEFZEL®
Media Temp Range (water)0°F to 250°F [-18°C to +120°C]
Media Temp Range (steam)
Maximum Inlet Pressure (steam)
Maximum Inlet Pressure (water)
Leakage0% for A to AB
Rangeability

 

ActuatorTFX24
Fail-SafeSpring Return
Torque18 in-lb [2.5 Nm]
Control InputOn/Off
Input Impedance
Position Feedback
Running Time (motor)75 seconds (0 to 18 in-lb)
Running Time (fail-safe)< 25 seconds @ -4°F to +122°F [-20°C to +50°C], < 60 sec @ -22°F [-30°C]
Auxiliary Switch
Power Supply24 VAC ± 20%, 50/60 Hz, 24 VDC ± 10%
Power Consumption2 W,1.3 W
Transformer Sizing5 VA (class 2 power source)
Electrical Connection3 ft, 18 GA appliance cable, 1/2″ conduit connector
Overload Protectionelectronic throughout 0 to 95° rotation
Shaft DiameterStandard: 1/4″ to 1/2″ round, centers on 1/2″
Angle of Rotationmax. 95°, adjustable with mechanical stop
Direction of Rotation (motor)reversible with CW/CCW mounting
Direction of Rotation (fail-safe)reversible with CW/CCW mounting
Position Indicationvisual indicator, 0° to 95° (0° is full spring return position)
Manual Override
Humiditymax. 95% RH non-condensing
Ambient Temperature-22°F to +122°F [-30°C to +50°C]
Ambient Temperature (safety)
Storage Temperature-40°F to +176°F [-40°C to +80°C]
Noise Levelrunning < 50 dB (A), spring return 62 dB (A)
Housing MaterialUL94-5VA
HousingNEMA 2, IP42, UL enclosure type 2
Agency ListingcULus acc. To UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. To 2004/108/EC
Quality StandardsISO 9001
Weight1.4 lbs (0.6 kg)

Honeywell T7047C2007 Electronic T Stat Remote Setpoint Thermistor Element *NEW OLD STOCK*

* Listing shows stock photo.

1420 ohm electronic sensor used in 70 series systems.

I:CNG02T

Pressure Transducer, 0-500 psis, 1/4 in. SAE female flare pressure connection with valve depressor.
 
I:CNG06T

** IMAGE IS STOCK PHOTO FROM VERIS WEBSITE **

These immersion probe type temperature sensors are both highly accurate and cost effective. Installation could not be easier. The sensor is encased in a corrosion-resistant stainless steel probe for durability, with 1/2″ NPT threads standard.

  • Wiring 22AWG; 2-wire:RTD Thermistor, 4-20mA; 3-wire: Voltage output models
  • Probe Stainless Steel
  • Test Pressure 200psi


APPLICATIONS

  • Tanks
  • Pipes
  • Chillers
  • Corrosion resistant stainless steel probe design

I:CNG05T

SIEMENS 172K-10308 BALL VALVE, 2WAY, 3/4″, 6.3CV, PROP, SR -NEW -FREE SHIPPING

Description

2-way 3/4 inch, 6.3 Cv ball valve assembly with chrome-plated brass ball and brass stem, 2-10 V, NC, fail safe actuator, 200 psi close-off, NPT

  • 200 psi close-off pressure
  • 0.4 to 160 Cv ranges depending on valve size
  • 600/WOG/ANSI 250 pressure rating
  • Double o-ring stem packing
  • Blow-out proof stem for high pressure safety
  • Thermal barrier on universal mounting bracket
 
CONDITION: NEW IN BAG. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE UPS
I:CNG54T
SIEMENS 171G-10360 BALL VALVE, 3WAY, 3/4″, 16CV, PROP, SR – NEW – FREE SHIPPING
 
 
 
CONDITION: NEW IN BAG. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE UPS
I:CNG54T
Description
The TE-6800 Series provides temperature sensing in room wall mount applications. It allows local setpoint temperature adjustment and temporary occupancy override.

A warmer/cooler dial is included on certain models for minor temperature adjustments from the setpoint. An occupancy override button allows the user to request a time-of-day scheduling override when the space is occupied outside of the normal occupied hours schedule. All sensors have DIP switches that enable or disable unit functions.

Depending on the model chosen, the wires connecting the sensor to the controller can be terminated using a screw terminal block or modular jack connection, offering wiring flexibility. All models include a Zone Bus access port for connecting accessories to access the 6-pin modular jack. This feature allows a technician to commission or service the controller via the sensor.

Features:
  • Controller configuration switch — allows users to adjust room comfort and to choose occupancy features that match the application and controller
  • Occupancy Light-Emitting Diode (LED) indicator — displays the current operating mode of the controller (VMA1200 and VMA1400 Series controllers only)
  • Manual override Pushbutton (PB) — overrides time-of-day scheduling when the space is occupied outside of normal occupied hours schedule
 
 
CONDITION: NEW IN SEALED BOX. MAIN PIC IS ONLY STOCK PHOTO. SEE OTHER PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T
Cassia™ EMS Door Sensor – CSDC1
for Use with Cassia™ Energy Management Systems


The Cassia™ Energy Management System (EMS) is comprised of EMS
Thermostats, Door Sensors, Motion Sensors, and Ethernet Coordinators (ECs).
The EMS reduces energy costs by minimizing HVAC usage when a guest room
is unrented or vacant. The EMS allows continuous monitoring of all online
devices within the property.


The EMS Door Sensor consists of a base (containing the Zigbee radio,
magnetic sensor, and battery) and separate magnet. The door sensor uses a
CR-2 lithium battery.
 
SPECIFICATIONS
Power
3V CR-2 Lithium Battery
Temperature range
-4° F to 140°F (-20°C to +60°C)
Communications
2.4 GHz, 16 channel spread spectrum radio frequency
DIMENSIONS

Component
Dimensions
Magnet
2.5 x 0.32 x 0.39 in. (63.5 x 8.1 x 9.9 mm)
Door Sensor
2.5 x 0.81 x 0.86 in. (63.5 x 20.5 x 21.8 mm)
STANDARDS

The Door Sensor complies with the following Standards:

Table 1: U.S. FCC Regulations

Standards/Regulations
Title
FCC Part 15
Class B Digital Device for Home or Office Us
 
SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T
Description
The HE-67xx Series Humidity devices house both a humidity and a temperature sensor in a wall or duct-mount style. The humidity sensor is capable of measuring Relative Humidity (RH) over the entire range of 0 to 100%, and its All-Polymer construction provides improved resistance to chemical corrosion. The TRUERH? product line delivers devices with RH accuracy of either ±2% or ±3% RH. TRUERH humidity elements produce voltage output signals proportional to measured humidity for humidity indication.

Temperature sensors are available in thin-film nickel, thin-film platinum, and silicon. The elements are powered with 14 to 30 VDC or 20 to 30 VAC and feature a user-selectable humidity output of 0 to 10 VDC or 0 to 5 VDC.

Features:
  • TRUERH circuitry and calibration techniques for which patent protection is pending
  • All-Polymer humidity sensor patented sensing element provides accurate and reliable humidity sensing
  • tested and calibrated with equipment certified to be in compliance with National Institute of Standards and Technology (NIST) guidelines
  • ±2% RH accurate model includes test and calibration equipment certificate of calibration conformance
  • humidity and temperature sensors in one unit eliminates the need for separate sensors and reduces installation costs
  • user-selectable output voltage range allows choice of standard voltage outputs for use with systems in service or new systems
 
 
CONDITION: NEW IN BOX. BOX HAS MINOR STORAGE SCUFFS AND LABEL ON TOP. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T

Temperature Sensors, NS Network Sensors Series

Item# NS-BTN7001-0 – 3X4.5.T.Pj; Network Rm 3″X4.5″ Temp Sensor Ms/Tp. Phone Jck.

 

NS Network Sensors Series Information
  • BACnet® Master‑Slave/Token‑Passing (MS/TP) Protocol Communication — Provides Compatibility with Metasys System Field Controllers and Facility Explorer Programmable Controllers in a Proven Communication Network
  • Backlit LCD Available on Some Models — Provides Real‑Time Status of the Environment with Backlighting Activated During User Interaction
  • Simple Temperature Setpoint Adjustment Available on Some Models — Enables You to Change the Setpoint with the Turn of a Dial
  • Onboard PIR Occupancy Sensor Available on Some Models — Maximizes up to 30% Energy Savings in High‑Energy Usage Environments, and Facilitates Trending of Floor Space Usage
  • Temporary Occupancy Available on Some Models — Provides a Timed Override Command, Which Temporarily Initiates an Alternate Mode
  • Field Selectable Default Display Setting on Some Models — Allows You to Toggle between Temperature and RH on the Display, and Set the Desired Default for Continuous Viewing
  • Fahrenheit/Celsius (F/C) Button Available on Some Models — Toggles the Display Temperature between Degrees Celsius and Degrees Fahrenheit
The NS Series Network Sensor offering includes NS Series Network Zone Sensors and NS Series Network Discharge Air Sensors. The NS Series Network Sensors are designed to function directly with Metasys® system Field Equipment Controllers (FECs), Input/Output Modules (IOMs), VAV Modular Assembly (VMA16) Controllers, and Facility Explorer FX‑PC Series Programmable Controllers (FX‑PCGs, FX‑PCVs, and FX‑PCXs).

The majority of NS Series Network Zone Sensors monitor room temperature; however, options are available to also monitor zone humidity, carbon dioxide (CO2), local temperature setpoint adjustments, and other variables. This data is transmitted to a controller on the Sensor Actuator (SA) Bus.

Some models of NS Series Network Zone Sensors include an onboard passive infrared (PIR) occupancy sensor that detects motion to determine if a space is occupied. This feature maximizes up to 30% energy savings in high‑energy usage environments such as schools, dormitories, offices, hospitals, and hotels by adjusting the temperature of the space based on the occupancy status. In addition, the PIR occupancy sensor facilitates trending of floor space usage in these environments.

The NS Series Network Zone Sensors include models with a temperature setpoint dial and LCD that allows occupants to view the zone temperature, Relative Humidity (RH), and view and adjust the zone temperature setpoint. Some temperature and humidity models include a push button to toggle between temperature and RH on the display. These models also have the capability to set the desired default display to either temperature or RH.

A fan mode push button is included to set the desired fan speed (AUTO‑OFF‑low‑medium‑high). An occupancy override function allows the user to signal to the controller that the zone is occupied to override the scheduled mode. Some models have DIP switches to set a unique address for applications that require multiple sensors.

For communication wiring flexibility, the wires connecting the network zone sensor to a controller can be terminated using a modular jack or screw terminals. Note: Mixing of phone jack and screw terminal devices on the same SA bus segment must be avoided.

Each network sensor includes an SA Bus access port to allow accessories to access the SA Bus. This plug allows accessories to service or commission the connected controller or gain access to any other controller on the same Field Controller (FC) Bus.

The NS Series Network Zone Sensor offering includes models that can be surface mounted, vertical wallbox mounted, or flush mounted to meet the requirements of the specific application. Some NS Series Sensor models are designed to assist with the California Energy Code (Title 24). Select models offer stylish black enclosures to suit specific architectural and interior design needs.

The NS Series Network Discharge Air Sensors monitor the duct temperature, typically at the discharge of the VAV box, and transmit this data to a local controller on the SA Bus using the 10 ft (305 cm) wiring lead included with the unit. The 10 ft (305 cm) wiring lead consists of four 22 AWG (0.6 mm) trade size color‑coded wires encased in a plenum‑rated jacket. Each of the wires is stripped and tinned for easy connection to the SA Bus screw terminal block.

The NS Series Network Discharge Air Sensors are available with either a 4‑ or 8‑in. (102 or 203 mm) temperature probe. All models include DIP switches for applications requiring multiple discharge air sensors, each with a unique DIP switch address

 

Specifications

Item Number:  NS-BTN7001-0
Brand:  Johnson Controls
Item Category:  HVAC Sensors
Subcategory:  Temperature Sensors
Series:  NS Network Sensors
Function:  Temperature
Application:  Indoor
Output:  1 kOhm Platinum RTD;BACnet
Display:  No Display
Set Point:  No
Override:  No
Temperature Range (F):  32 to 104 Degrees F
Approvals:  UL;CE
 
CONDITION: UNIT IS NEW OLD STOCK. BOX IS OPEN AND A LITTLE WORN. SEE PICS FOR DETAILS. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T

Johnson Controls Temperature Sensors, NS Network Sensors Series

 

NS Network Sensors Series Information
  • BACnet® Master‑Slave/Token‑Passing (MS/TP) Protocol Communication — Provides Compatibility with Metasys System Field Controllers and Facility Explorer Programmable Controllers in a Proven Communication Network
  • Backlit LCD Available on Some Models — Provides Real‑Time Status of the Environment with Backlighting Activated During User Interaction
  • Simple Temperature Setpoint Adjustment Available on Some Models — Enables You to Change the Setpoint with the Turn of a Dial
  • Onboard PIR Occupancy Sensor Available on Some Models — Maximizes up to 30% Energy Savings in High‑Energy Usage Environments, and Facilitates Trending of Floor Space Usage
  • Temporary Occupancy Available on Some Models — Provides a Timed Override Command, Which Temporarily Initiates an Alternate Mode
  • Field Selectable Default Display Setting on Some Models — Allows You to Toggle between Temperature and RH on the Display, and Set the Desired Default for Continuous Viewing
  • Fahrenheit/Celsius (F/C) Button Available on Some Models — Toggles the Display Temperature between Degrees Celsius and Degrees Fahrenheit
The NS Series Network Sensor offering includes NS Series Network Zone Sensors and NS Series Network Discharge Air Sensors. The NS Series Network Sensors are designed to function directly with Metasys® system Field Equipment Controllers (FECs), Input/Output Modules (IOMs), VAV Modular Assembly (VMA16) Controllers, and Facility Explorer FX‑PC Series Programmable Controllers (FX‑PCGs, FX‑PCVs, and FX‑PCXs).

The majority of NS Series Network Zone Sensors monitor room temperature; however, options are available to also monitor zone humidity, carbon dioxide (CO2), local temperature setpoint adjustments, and other variables. This data is transmitted to a controller on the Sensor Actuator (SA) Bus.

Some models of NS Series Network Zone Sensors include an onboard passive infrared (PIR) occupancy sensor that detects motion to determine if a space is occupied. This feature maximizes up to 30% energy savings in high‑energy usage environments such as schools, dormitories, offices, hospitals, and hotels by adjusting the temperature of the space based on the occupancy status. In addition, the PIR occupancy sensor facilitates trending of floor space usage in these environments.

The NS Series Network Zone Sensors include models with a temperature setpoint dial and LCD that allows occupants to view the zone temperature, Relative Humidity (RH), and view and adjust the zone temperature setpoint. Some temperature and humidity models include a push button to toggle between temperature and RH on the display. These models also have the capability to set the desired default display to either temperature or RH.

A fan mode push button is included to set the desired fan speed (AUTO‑OFF‑low‑medium‑high). An occupancy override function allows the user to signal to the controller that the zone is occupied to override the scheduled mode. Some models have DIP switches to set a unique address for applications that require multiple sensors.

For communication wiring flexibility, the wires connecting the network zone sensor to a controller can be terminated using a modular jack or screw terminals. Note: Mixing of phone jack and screw terminal devices on the same SA bus segment must be avoided.

Each network sensor includes an SA Bus access port to allow accessories to access the SA Bus. This plug allows accessories to service or commission the connected controller or gain access to any other controller on the same Field Controller (FC) Bus.

The NS Series Network Zone Sensor offering includes models that can be surface mounted, vertical wallbox mounted, or flush mounted to meet the requirements of the specific application. Some NS Series Sensor models are designed to assist with the California Energy Code (Title 24). Select models offer stylish black enclosures to suit specific architectural and interior design needs.

The NS Series Network Discharge Air Sensors monitor the duct temperature, typically at the discharge of the VAV box, and transmit this data to a local controller on the SA Bus using the 10 ft (305 cm) wiring lead included with the unit. The 10 ft (305 cm) wiring lead consists of four 22 AWG (0.6 mm) trade size color‑coded wires encased in a plenum‑rated jacket. Each of the wires is stripped and tinned for easy connection to the SA Bus screw terminal block.

The NS Series Network Discharge Air Sensors are available with either a 4‑ or 8‑in. (102 or 203 mm) temperature probe. All models include DIP switches for applications requiring multiple discharge air sensors, each with a unique DIP switch address

 

Specifications

Item Number:  NS-BTN7001-0
Brand:  Johnson Controls
Item Category:  HVAC Sensors
Subcategory:  Temperature Sensors
Series:  NS Network Sensors
Function:  Temperature
Application:  Indoor
Output:  1 kOhm Platinum RTD;BACnet
Display:  No Display
Set Point:  YES
Override:  YES
Temperature Range (F):  32 to 104 Degrees F
Approvals:  UL;CE
 
CONDITION: UNIT IS NEW OLD STOCK. BOX IS SEALED BUT A LITTLE WORN. SEE PICS FOR DETAILS. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T

Features and Applications

  • Low cost with high reliability
  • Available in pressure ranges from 0/0.25”WC up to 0/15PSI, including bi-directional
  • Output stability of 0.5% FSO
  • Perfect for a variety of air and inert gas applications such as duct static, VAV and fan control
  • Easy wiring via a pluggable screw terminal block
  • Pressure range calibrated to customer’s specific requirement
  • Able to handle high overpressure
  • Internally conditioned allowing it to automatically accept unregulated 12-24 VDC or 24 VAC power
  • Dual die sensor allows for the best temperature correction
  • Each unit is individually temperature compensated

Specifications

Accuracy*:<+/-1.0% FSO
Stability:+/-0.5% FSO/yr
Thermal Effects:+/-0.075%/°C
Overpressure:1-10”WC = 100”WC
11-20”WC = 10x rated pressure
21-30”WC = 5x rated pressure
Over 30”WC = 45 PSI
FSO Pressure Range:0/0.25”WC up to 0/15PSI
(bi-directional ranges available)
Compensated Range:10° to 50°C
Media:Non-corrosive, non-ionic gases
Operating Humidity:90% RH non-condensing
Operating Temp:-25° to 70°C
Input Supply**:12-24 VDC/24VAC**
Supply Current: 
Load Resistance:2KΩ minimum on voltage out, 250Ωmaximum loop resistance on 4-20mA output
(500Ω max loop resistance available upon request**)
Output Signal:1-5VDC, 1-6VDC, 1-10VDC** or 4-20mA*** (call for custom outputs)
Circuit Protection:Output limited and reverse voltage protected
Electrical Connections:Pluggable Screw Terminal Block
Pressure Connections:Barbed fitting for 1/8” ID tubing
Enclosure:Impact resistant ABS plastic
Dimensions:Approx. 3.5” x 2.7” x 1.4” (8.7cm x 6.8cm x 3.5cm)

* Includes non-linearity hysteresis and non-repeatability at a fixed temperature
** An input of 18-24VDC/AC is required to drive a 500Ω load; the same input is also required for a 1-10VDC output
*** 3-wire 4-20mA

Siemens QAA2280.EWNC RTS Sensing Only Room Temperature Sensor -NOS-Free Shipping
 
  • Room Temperature Sensor
  • Digital P1
  • No HMI
  • No Logo
  • Tool Port
  • RJ-11 Connection
  • For Siemens TEC Controllers Only

Product Attributes

  • 1.00 lbs
  • United States of America
  • 9032100030
  • DIGITAL P1
  • 10K THERMISTOR
 
CONDITION: NEW IN BOX. BOX ONLY OPENED TO TAKE PICTURES. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T
Siemens QAA2230.FWNC RTS ROOM SENSOR, TMP ADJ, LCD, 10KT2 – NEW – FREE SHIPPING
 
Room Temperature Sensor, 10K Ohm Type 2 NTC Thermistor, Full Feature, No Logo, Tool Port, For Talon Controllers

Specifications

Item NumberQAA2230.FWNC
BrandSiemens
Element Type10K Type II
Sensor ConfigurationRoom
SensorTemperature
CONDITION: NEW IN BOX. BOX ONLY OPENED TO TAKE PICTURES. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T

Details for M9116-AGC-2

ELECTRIC MOTOR ACTUATOR; 140 IN-LB/16NM; 24 VAC/VDC; ON/OFF-FLOATING; 80 SEC; 2 AUX SWITCHES

Specifications

Item NumberM9116-AGC-2
BrandJohnson Controls
Actuator TypeDamper
Control InputFloating
End SwitchNo
HousingNEMA 2
Spring ReturnNon-Spring Return
Torque140 in-lb
Voltage24V
 
CONDITION: UNIT IS NEW OLD STOCK. BOX IS UNSEALED AND A LITTLE WORN.SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE UPS
I:CNG54T
RUSKIN RUS-S120-S ACTUATOR, 27″#, SR, 120V, NEMA2, SWITCH – NOS – FREE SHIPPING
 
Electric 120 Volt Control Damper Actuator – Direct Coupled Spring Return
Overview
Product Features
Ruskin model RUS-S120(S) electric On/Off spring return actuator designed for factory mounting on damper up to 6 sq. ft. with blade and jamb seals. Actuators can be mounted directly to a damper shaft from 1/4 to 1/2 inch (6 to 12 mm) diameter with a universal clamp. An optional line voltage auxiliary switch indicates an end-stop position or performs switching functions within the selected rotation range.
 
CONDITION: UNIT IS NEW. NO MANUFACTURER BOX. PULLED OFF OF NEW DAMPER. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE UPS
I:CNG54T
Accton 144660-053 242066-400 REV:03 Ethernet Network Adapter Card FOR Hp Agilent
 
 
CONDITION: UNIT IS NEW OLD STOCK. NEVER INSTALLED. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG54T

Setra’s Model 267 and 267MR pressure transducers sense gauge (static) or differential pressure in air pressure ranges as low as 0.1”WC Full Scale up to 100”WC. 

The Model 267 gauge pressure transducer is offered in a high level voltage or 4 to 20 mA output and is available with a static pressure probe for installation directly onto the duct. The 0.25” diameter pressure probe is made of sturdy extruded aluminum and is designed with baffles to prevent velocity pressure errors. This unit is also available with an LCD display.

The 267MR multi-range transducer offers 6 field selectable pressure ranges (bidirectional and unidirectional), and field configurable outputs of 0 to 5 VDC, 0 to 10 VDC, and 4 to 20 mA. With the flip of a switch the user can field calibrate the unit and be assured of optimum performance.

 

  • Multi-Range Capability
  • 6 Field Selectable Ranges via Dip Switches
  • Field Selectable 0 to 5 VDC or 0 to 10 VDC Output
  • NEMA 4/IP65 Rated Housing
  • Optional Accuracies as High as 0.25% FS
  • Optional LCD Display
  • 24 VAC or 24 VDC Excitation
  • Integral Static Probe
Technical Specifications
 Model: Model 267 
 Ranges: {R25} 0 to 0.25 or +/- 0.25 
 Units: {W} in WC 
 Type: {D} Unidirectional 
 Output: {2E} 0-10 VDC 
 Fitting Type: 1/4″ NPT F, Brass, Optional Fitting 
 Electrical Termination: {A1} 1/2″ Conduit Opening 
 Accuracy: {H} +/- 0.5% FS – with Cal. Cert 
 Display: {D} LCD Display 

Metasys (Johnson Controls) AS-VAVDPT1-1 Controller -New Old Stock -Free Shipping

 

Condition: New old stock. Sealed in factory sealed box. Box a little worn. See pics.

Shipped: Free USPS Parcel select ground

Inv: cng82s

VERIS CWLSXX CO2 LCD WALL SENSOR – NEW IN BOX – FREE USPS SHIPPING
 

SPECIFICATIONS

Application Zone      :     Living Space
Application      :     Wall
Brand      :     Veris
CO2 Measurement Accuracy      :     ±30 ppm ±2% of measured value
CO2 Measurement Range      :     0 – 2000 ppm | 0 – 5000 ppm
CO2 Measurement Repeatability      :     ±20 ppm ±1% of measured value
CO2 Measurement Resolution      :     1 ppm
CO2 Sensor Type      :     NDIR
Color      :     Cloud White
Dimension Depth      :     1.2″ (30 mm)
Dimension Height      :     4.8″ (122 mm)
Dimension Width      :     3.5″ (89 mm)
Display Resolution      :     2 Rows x 8 Characters
Display Size      :     1.2″ x 0.6″ (30,5 mm x 14 mm)
Display Type      :     LCD
Electrical Wiring Size      :     24 – 18 AWG (0.22 – 0.75 mm²)
Enclosure Material      :     ABS Plastic
Humidity Calibration Certificate      :     None
Measurement Type      :     CO2
Mounting      :     Wall
Operating Humidity      :     0 – 95% RH, non-condensing
Operating Temperature      :     32 – 122 °F (0 – 50 °C)
Output Specifications      :     4 – 20 mA | 0 – 5 V | 0 – 10 V
Outputs      :     Analog output
Override      :     No
Product Certification      :     CE
Product Type      :     Sensor
Range      :     CWL
Response Time      :     CO2: <60 seconds for 90% step change
Setpoint      :     No
Supply Voltage AC Nominal      :     24 VAC
Supply Voltage DC Nominal      :     20 – 30 VDC
Temperature Calibration Certificate      :     None
Temperature Sensor Type      :     None
Warranty      :     5 years

FEATURES

CWL carbon dioxide (CO2) sensors maximize energy savings, while helping optimize ventilation. These sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CWL series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and increasing tenant comfort.

  • Microprocessor based design increases accuracy and reduces installation time
  • Self-calibrating – innovative self-calibration algorithm easy to maintain
  • Non-dispersive infrared technology (NDIR) repeatable to +/-20 ppm +/-1% of measured value high accuracy measurement
  • Snap-on faceplate no screws required, making installation and service easy
  • Field-selectable outputs for operation flexibility
  • Integrated probe – integrated transducer and probe eliminates the need to install a separate pick-up tube
  • Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) US Patent 5,844,138 HS sensor
 
STOCK PHOTO POSTED. ONE OF THE UNITS UNSEALED TO VISUALLY CHECK QUALITY. PLEASE ASK QUESTIONS BEFORE PURCHASING.
 

SIEMENS Landis & Staefa NRK16/A Remote Control Application Controller.

Condition: New old stock. Never installed. Has storage blemishes. See pics for details. Ask questions before purchasing.

Shipping: Free shipping – UPS

Item specifics

Condition:
New: A brand-new, unused, undamaged item in its original packaging.
 
Compatible Brand: For Honeywell
Power Source: Corded Electric
Color: White
Item Diameter: X
Connection Size: X
Compatible Model: C7232A1008
MPN: C7232A1008
Compatible Product: Ventilation Control
Item Length: 5 in
Brand: Honeywell
Type: CO2 Sensor
Model: Honeywell C7232A1008
Item Width: 3-5/32”
Item Weight: 0.25 lb

Item specifics

Condition:
New – Open box: An item in excellent, new condition with no functional defects. The item may be …
 
Brand: Intec Controls
Model: ADT-03-1110-C-11XX1211A / SPC3-1112-200
MPN: ADT-03-1110-C-11XX1211A / SPC3-1112-200
Gas(es) Detected: CO

Item specifics

Condition: New – Open box: An item in excellent, new condition with no functional defects.
 
Brand: Trane ServiceFirst
Type: Control Circuit Board Module X13650386-03-0
Custom Bundle: No
Model: X13650386-03-0
MPN: BRD00741
Country/Region of Manufacture: United States
Modified Item: No
UPC: Not Applicable

Item specifics

Condition: New: A brand-new, unused, undamaged item in its original packaging.
 
Brand: Carrier
Compatible Equipment Type: X
Model: TRANSICOLD
MPN: 06EA660135
Compatible Equipment Make: Carlyle
UPC: Does not apply

Setra 2301100PD2F2DB Differential Pressure Transducer 0-100 PSID .05-5.05 VDC.

These are high level output, low differential pressure transducer designed for wet to wet differential pressure measurements of liquids or gases. A fast-response capacitance sensor and signal conditioned electronic circuitry provide a highly accurate, linear analog output proportional to pressure. Both unidirectional and bidirectional pressure ranges are available for applications with line pressure up to 250 psig. All parts exposed to the pressure media are stainless steel and elastomer seals. The unit has a NEMA 4/IP65 rated package to withstand environmental effects.

They can be supplied with an optional 3-valve manifold assembly for ease of installation and assembly. The 3-valve manifold is a machined brass body requiring no internal pipe connections, thereby eliminating the risk of internal leaks. The manifold’s rugged, yet compact, construction requires minimum space for installation and use. The bleed ports allow for total elimination of air in the line and pressure cavities. If the unit is ordered with the 3-valve manifold, the system is shipped completely assembled and ready for a wall or piping mounting.

Condition: New unit. Worn box. Please see pics for details. Ask questions before purchasing.

Item specifics

Condition: New: A brand-new, unused, undamaged item in its original packaging.
 
Brand: Honeywell
Model: VLC-550 VLC-550C3
MPN: VLC 550 C3
Controller Platform: Alerton

TM-2161-0005 JOHNSON CONTROLS SENSOR

Description

TM-2161-0005- The TM-2161-0005 has a NTC 10K sensing element. The enclosure is a 3×4.5 global sensor design. There is also a temporary occupancy override button to temporarily override the pre-set standby mode and return to the comfort mode. A temperature setpoint dial with warmer/cooler adjustments allows for remote temperature adjustments.(+/-).

UPC‘66201104354’
ManufacturerJohnson Controls
Part NumberTM-2161-0005
Short DescriptionTM21610005
 
 
*UNIT IS NEW OLD STOCK / BOX HAS STORAGE SCUFFS
I:CNG133S

* IMAGE IS STOCK PHOTO AND MAY NOT BE EXACT *

TAC Xenta 101-VF-24 3-Speed Fan Coil Controller. Controller new old stock. Box has minor storage scuffs. 
I:01NST

TC sensors are ceiling-mounted in an unobtrusive housing. The easy-to-install units are ideal for office environments, as well as museums, galleries, or any other open setting. These sensors are highly accurate, reliable, and come with an extended five-year warranty.

APPLICATIONS

  • Hospitals and operating rooms, pharmaceutical labs
  • Clean rooms
  • Food processing plants
  • Environmental testing facilities and other institutional applications
  • Ceiling mount probe for more accurate readings…ideal for open office environments
  • Recessed press-fit sensor virtually “disappears”…great for museums and galleries
  • Wiring 22AWG; 2-wire:RTD Thermistor, 4-20mA; 3-wire: Voltage output models
  • Housing White ABS Plastic (For Black, consult factory)
 
I:CNG05T
GMW21 VAISALA WALL CO2 SENSOR – NEW IN BOX – FREE SHIPPING
 
CONDITION: NEW IN BOX. ONLY OPENED TO TAKE PICTURES. BOX HAS MINOR STORAGE SCUFFS. SEE PICS FOR DETAILS. ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG110S/CNG71S
VERIS CWLSXTHX3F WALL CO2 / T SENSOR W/ LCD SCREEN – NEW IN BOX – FREE SHIPPING
 
CONDITION: NEW IN BOX. BOX ONLY OPENED TO VERIFY INNER SEAL AND TO TAKE PICTURES. SEE PICS FOR DETAILS. ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG110S
RTD-1K/24 ATKINSON ELECTRONICS CRM2 MODULE FOR SIEMENS / STAEFA SMART II – NEW
 
CONDITION: NEW. SEE PICS FOR DETAILS. ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE USPS
I:CNG110S

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging.
 
Compatible Brand: For Interface
Item Thickness: 1 in
Power Source: WIRED
Compatible Model: X
MPN: 090016710
Compatible Product: AC
Item Length: X
Brand: Daikin
Type: BAS interface board
Voltage: X
Amperage: X
Model: MSTP Interface
Item Weight: 0.25 lb
Item Width: 4.5″
 
SIEMENS 599-10302 Ball Valve, 2-Way, 1/2 in. NPT – NEW IN BAG – FREE SHIPPING
 
2W 1/2″ Ball Valve, 1Cv, chrome-plated brass ball, brass stem, 200 psi close-off
 
CONDITION: NEW IN BAG. SEE PICS FOR DETAILS. PLEASE ASK QUESTIONS BEFORE PURCHASING.
SHIPPING: FREE SHIPPING
I:CNG110S